# I Thought Zigbee Was Just Bad. It Wasn't. Home Assistant was my first experience with Zigbee, and for years I was convinced Zigbee itself was the problem. I started with a SLAE.SH adapter. I'd pair my devices, they'd join the network, and everything would work, for a day or two. Then the network would just fall apart. Devices stopped responding, and the only fix was to tear the whole network down, rebuild it, and pair every single device again. A day or two later, I'd be right back where I started. I figured my adapter was just bad, so I bought Home Assistant's own Zigbee adapter. If anything was going to work, it should have been the one made by the people who make the software. Same problem. I re-flashed the adapters, tried every fix I could find, and threw everything I had at the wall. Nothing stuck. At that point I thought maybe Zigbee just really sucks. I didn't understand why people liked it, or I figured I was doing something wrong. Then I bought some Zigbee blinds from China that came with their own little USB-powered Tuya Zigbee hub, and they worked perfectly. That's what clued me in. If this $10 thing could work, why wasn't my setup working? So I got a SMLIGHT SLZB coordinator, switched to Zigbee2MQTT, and it has worked absolutely perfectly. Same house, same devices, and no more rebuilding the network every couple of days. Zigbee was never the problem. If your first taste of Zigbee has been a network that keeps falling apart in Home Assistant, don't give up on it yet. Try Zigbee2MQTT first.